Specification
| The Compressor is a 7+7 bladed 88mm inducer, 117mm exducer 121mm tip rated over 125lb/min. Recommended for use in high flow
750-1200HP applications. Compressor housing is a 5" hose style inlet, 4.21" V-Band outlet.
-Twin hydrodynamic journal bearings.
-Extended tip technology Billet compressor wheel.
-Recommend application horsepower: 750-1200HP
-Fit Vehicle: Universal turbo for performance use, racing car etc.
-If boost pressure higher than 2.5 Bar, it will significantly reduce the turbo lifespan and may result in damaging of you engine .
|
